Tip Tilt Piezo Stage Mirror Mounting

A tip tilt piezo stage provides the opportunity to dynamically scan a mirror with extreme precision and control. Piezo mirrors are used for laser beam steering and image stabilization applications. There are a variety of options built into nPoint systems for mounting purposes. Below are only a few suggestions, as custom mounting platforms and stages […]

Read more →

Components of a Nanopositioning System

Nanopositioning systems provide the opportunity to enable many advanced applications. Their use has spread from AFMs to optics and multiple new technologies. While selecting a system can be complex at times, there are three main components that work together to provide motion on the nanoscale. Each component will briefly be discussed and can be studied […]

Read more →

Piezoelectric Actuators Used in Flexure Stages

nPoint uses piezoelectric stack actuators to provide motion to its flexure stages. These stacks are often referred to as “piezos” and this is what puts the “piezo” in “piezo stage.” Actuators are stacked with multiple piezo tiles to provide larger displacement and hence the term “piezo stack”.  The material used for the piezo tiles is […]

Read more →

Custom Programming for Nanopositioning Stages

nPoint uses digital control electronics in its nanopositioning systems. Electrical, mechanical, and software engineering are all done in-house. This flexibility allows for custom development to meet the requirements set forth by an external user. The following provides an example of custom software features programmed at nPoint directly for a customer application. Read: OEM and Custom […]

Read more →

OEM and Custom Piezo Stage Development

The goal at nPoint is to meet the specifications set forth by each customer. In many cases, this can be done with nanopositioning systems that have previously been designed and manufactured. There are however, many applications where a custom stage is necessary, such as a component of an OEM product. nPoint works with a variety […]

Read more →

Parallel vs Serial Kinematic Flexure Stage Design

When designing piezo flexure stages two examples that dominate mechanical design include parallel and serial kinematics. At nPoint we employ both strategies to meet customer requirements. Testing and calibration are always done with external interferometric sensors regardless of flexure design and feedback sensor choice. Specifications tested in this manner are actual, not theoretical sensor or […]

Read more →

Pin It on Pinterest