Skip to Content
Hexagonal shapes

nPS35 Stage

Compact Stages with Cross-roller Bearings

nPS35

The nPS35 are extremely compact stages with cross-roller bearings. They are offered in both lead screw (LS) and ball screw (BS) versions. The lead screw option allows for lower cost and is especially helpful in vertical applications where self-locking is needed. The ball screw option is available for applications requiring higher efficiency, duty cycle or speed.

The mounting pattern allows for seamless integration with the nPCube piezo stage. Combining the nPS35 stages with any X, XY or XYZ version of the nPCube creates multi-axis systems that offer up to 12 mm of positioning range and high-speed scanning necessary in Photonics, Precision Assembly and Biomedical applications.

Request Quote

Specifications DescriptionnPS35-03LS12nPS35-05BS12
Maximum Travel12 mm12 mm
Screw Lead0.3048 mm (Leadscrew)0.5 mm (Ballscrew)
Maximum Velocity (unloaded)2.5 mm/s5 mm/s
Accuracy (Full Travel ISO 230)15 um7.5 um
Bi-directional Repeatability (Full Travel)5 um2.5 um
Pitch120 urad120 urad
Yaw120 urad120 urad
Rotary Encoder Resolutions (for homeing and stall detection)4000 cts/rev4000 cts/rev
Linear Travel per microStep *7 nm10 nm
Minimum Incremental Step **100 nm100 nm
Maximum Load Horizontal10 Kg10 Kg
Maximum Load Vertical10 Kg10 Kg
Maximum Load Moment (Pitch)10 Nm10 Nm
Maximum Load Moment (Yaw)8.5 Nm8.5 Nm
Maximum Load Moment (Roll)22 Nm22 Nm
Optional Limit SensorHall, 5V NPN/PNPHall, 5V NPN/PNP
Stage MaterialSSSS
Stage Mass300 gr300 gr
Cable Length2 m2 m
Motor SpecificationsDetails
Motor2 phase stepper
Motor Step Angle1.8 degrees
Motor Max Voltage36 Vdc
Motor Rated Current1 Amp
Motor Phase Inductance2.5 mH
Motor Resistance2.7 Ohm

You will be able to view the available part numbers when you REQUEST a QUOTE.

Request Quote

* Smallest step that the drive can command when micro stepping is used

** Smallest step that the stage can repeatably perform while moving in the same direction

Related Resources:

Announcement